Automated transfer for high rig floors
The ZJ30 automated catwalk loads, raises and transfers drill pipe, drill collars and casing between the pipe rack and rig floor. Manual, automatic and remote operating modes support different rig-site workflows while helping reduce manual lifting and thread damage.
Application note
Published values below describe the referenced configuration. Final dimensions, loads and cycle time are confirmed against the customer’s tubular program and rig layout.
Key features
- Handles drill pipe, drill collars and casing
- Manual, automatic and remote operating states
- Wired, wireless and remote control options
- Designed to reduce manual handling and thread damage
- Integrated mechanical, hydraulic and electrical system
Specifications
| Applicable rig-floor height | 3.3–4.5 m |
|---|---|
| Handling cycle | 50 s |
| Maximum tubular weight | 2,700 kg |
| Maximum tubular length | 12 m |
| Maximum tubular diameter | 340 mm |
| Hydraulic rated flow | 160 L/min |
| Hydraulic rated pressure | 16 MPa |
| Motor power | 37 kW |
| Wireless remote range | Up to 80 m |
| Overall dimensions (L × W × H) | 12.68 × 1.28 × 1.76 m |
| Total mass | 12,560 kg |
Delivery and support
- Rig-layout and tubular-program review
- Interface and control definition
- Factory testing and documentation
- Commissioning support
- Operator training and spare-parts support